VMPX [Ventilation Manager Power eXtended] controllers for the "Seseragi®"

The VMPX controllers regulate power, air supply and exhaust of the individual fan units.
Various advanced features are available depending on the model, tailored to your needs.

Operation Panel

• ① Power supply
• ② Air flow selection
• ③ Filter inspection indicator/ Reset
• ④ Heat exchange mode
• ⑤ Nightpurge mode
• ⑥ Display air flow intensity

① Press the power supply for approx. 5 seconds to switch the device on/off.
② With the centralized controller VMPX-AQ, by pressing the air flow selection button, you can operate the machine in four different modes.
③ When the LED of the filter inspection sign lights up, inspect the filter. After inspection, press and hold the button ③ for about 3 seconds to reset the maintenance interval.
④ The heat exchange mode is the default operating mode.
⑤ This button is used to change to night purge mode.
⑥ According to the selected level of airflow intensity, up to 4 LEDs light up. Level 1 and 2 are the usual levels. If the kitchen is used for family celebrations, barbecues or similar, level 2 is recommended. (The shortest indicator LED represents level 1, the others represent levels 2-4, with level 4 being the longest).

Live in the comfort zone due to the VMPX-NH controller with humidity regulation

Influences of the surrounding temperature and humidity factors on the human body

Automatic adjustment of operation time

The humidity in the air gets absorbed on the surface of the heat storage element of the "Seseragi®" as it passes through. Moisture absorption rates are high immediately after reversing the fan's rotation, but decrease soon thereafter. Following these characteristics, it is possible to adjust the humidity levels of the house by tuning the timing of the inversion intervals. The humidity sensor controls the indoor humidity levels by regulating the inversion intervals to 15-140 seconds.

Operation Panel

LED color change humidity indicator rH[%]

• ① Power supply
• ② Air flow selection
• ③ Filter inspection indicator/ Reset
• ④ Heat exchange mode
• ⑤ Nightpurge mode
• ⑥ Display air flow intensity

① Press the power supply for approx. 5 seconds to switch the device on/off.
② With the centralized controller VMPX-AQ, by pressing the air flow selection button, you can operate the machine in four different modes.
③ When the LED of the filter inspection sign lights up, inspect the filter. After inspection, press and hold the button ③ for about 3 seconds to reset the maintenance interval.
④ The heat exchange mode is the default operating mode.
⑤ This button is used to change to night purge mode.
⑥ According to the selected level of airflow intensity, up to 4 LEDs light up. Level 1 and 2 are the usual levels. If the kitchen is used for family celebrations, barbecues or similar, level 2 is recommended. (The shortest indicator LED represents level 1, the others represent levels 2-4, with level 4 being the longest).

Living in a comfort zone thanks to the VMPX-AQ Controller with CO₂ regulation functionality

Automatic air flow adjustment mode

The centralized controller VMPX-AQ with a built-in CO₂ sensor detects the CO₂ concentration of the indoor air and automatically adjusts the airflow of the fan unit. If the air quality is poor, it automatically increases the ventilation volume. Dirty air is taken out of the room as soon as possible, and clean outside air is taken into the room. Heat exchange ventilation helps to maintain optimum warm air in the room. Indoor air quality is indicated by the centralized controller VMPX-AQ. Coronavirus countermeasures are taken by increasing or decreasing the ventilation volume in conjunction with the CO₂ concentration.

CO₂ control to reduce virus concentration

As a countermeasure against the new coronavirus drifting in the air, Seseragi-AQ (AQ=Air Quality) is a corona countermeasure ventilation system that automatically measures the carbon dioxide (CO₂) concentration, displays it, and controls ventilation. When a person breathes, CO₂ is exhaled, and if there is a lot of CO₂, it means that the air is stagnant and needs ventilation! As the CO₂ concentration decreases, the content of viruses and bacteria in the indoor air also decreases.

• ① Power supply
• ② Air flow selection
• ③ Filter inspection indicator / Reset
• ④ CO₂ mode control
• ⑤ Heat exchange mode
• ⑥ Nightpurge mode

① Press and hold the power button for about 5 seconds to turn off the fan unit.
② With the centralized controller VMPX-AQ, by pressing the air flow selection button, you can operate the machine in four different modes.
③ When the LED of the filter inspection sign lights up, inspect the filter. After inspection, press and hold the button ③ for about 3 seconds to reset the maintenance interval.
④ This button is used to change to CO₂ mode.
⑤ The heat exchange mode is the default operation mode.
⑥ This button is used to change to night purge mode.